UTOOLMART UT190822Z-1005 Masonry Drill Bit Carbide Tipped 111622381119 Rotary Hammer 16MM 150MM 9MM

( Brand: Utoolmart ), ( Manufacturer Part Number: UT190822Z-1005 ), ( Part Type: Bit Drill Hammer ), ( UPC: 111622381119 ), ( Size: 16mm X 150mm )

Review UTOOLMART Masonry Drill Bit 16mm 150mm Carbide Tipped Rotary Hammer 9mm

The **Utoolmart UT190822Z-1005 16mm x 150mm Carbide-Tipped Masonry Drill Bit** is a high-performance rotary hammer drill bit designed specifically for heavy-duty masonry work, offering unmatched durability and precision in demanding applications. Engineered with a **16mm shank diameter** for optimal compatibility with most rotary hammer drills, this bit is built to handle the toughest materials, including brick, concrete, stone, and reinforced walls, without compromising on efficiency or longevity. The **150mm (5.9-inch) length** provides ample reach for deep drilling tasks, reducing the need for frequent bit changes and minimizing fatigue during extended use. At the core of its performance is a **high-quality carbide tip**, a material renowned for its exceptional hardness and resistance to wear, ensuring consistent cutting action even when drilling through abrasive surfaces. The bit s **spiral flute design** enhances chip evacuation, preventing clogging and maintaining a steady flow of debris away from the drill site, which is critical for maintaining drilling speed and preventing overheating. The **9mm (0.35-inch) core diameter** strikes a balance between strength and flexibility, allowing the bit to navigate curved paths and tight spaces while still delivering the torque necessary to penetrate dense materials. Whether you're installing anchors, setting rebar, or creating pilot holes for larger fasteners, this bit delivers reliable, clean, and precise results with minimal effort. Built to withstand the rigors of professional and DIY projects alike, the **Utoolmart UT190822Z-1005** is an indispensable tool for anyone serious about masonry work, offering a perfect blend of power, precision, and endurance.

### **Pros and Cons of buying a Utoolmart UT190822Z-1005 Masonry Drill Bit (16mm, 150mm, Carbide-Tipped Rotary Hammer, 9mm Shaft)**

1. **Durability and Longevity** The carbide-tipped design ensures resistance to wear, making it suitable for heavy-duty masonry work such as drilling into brick, concrete, or stone. Carbide bits last significantly longer than standard steel bits, reducing the need for frequent replacements.

- Installing anchors, bolts, or screws in masonry walls.

- Drilling pilot holes for larger fasteners.

- Light to medium-duty concrete or brickwork projects.

- Compatibility with most rotary hammers and hammer drills due to the standard 9mm SDS-plus shank (check your tool s compatibility).

3. **Efficiency** Carbide bits maintain a sharp edge longer, reducing the need for frequent sharpening or replacement. This improves productivity, especially in professional or DIY projects requiring multiple holes.

4. **Cost-Effective for Heavy Use** While the upfront cost may be higher than basic steel bits, the extended lifespan justifies the investment for frequent or professional use, saving money over time.

5. **Smooth Drilling Action** Carbide tips reduce heat buildup and friction, leading to cleaner, more precise holes with less chipping or cracking in brittle materials like brick or concrete.

6. **Compatibility with SDS-Plus Tools** The 9mm SDS-plus shank ensures a secure fit in most modern rotary hammers or hammer drills, reducing slippage and improving control during drilling.

7. **Brand Reputation** Utoolmart (or similar brands under this line) is known for producing reliable power tool accessories, often backed by warranties or customer support, which adds confidence in the product s quality.

---

1. **Higher Initial Cost** Carbide-tipped bits are more expensive than standard steel or diamond-coated alternatives. For occasional use, this may not be cost-effective compared to cheaper, disposable bits.

2. **Limited Use on Soft Materials** While excellent for masonry, carbide bits are less ideal for drilling into soft materials like wood or plastic. They may not perform as well as specialized wood bits, which could lead to unnecessary wear or poor results.

3. **Fragility Compared to Diamond Bits** For extremely hard or abrasive materials (e.g., reinforced concrete or very dense stone), diamond-coated bits may outlast carbide tips. Carbide bits can still work but may require more frequent replacements in such cases.

4. **Shank Compatibility Issues** While the 9mm SDS-plus shank is common, some older or non-SDS tools may not accommodate it. Always verify compatibility with your specific rotary hammer or drill to avoid damage or poor performance.

5. **Potential for Chipping** If not used correctly (e.g., excessive force, incorrect speed settings), carbide tips can chip or break, especially when drilling at awkward angles or in uneven surfaces.

6. **Not Ideal for Deep Drilling** The 150mm length is suitable for most wall applications but may be insufficient for deep drilling (e.g., beyond 15 20 cm into thick concrete). For deeper holes, a longer bit would be necessary.

7. **Maintenance Requirements** Carbide bits should be cleaned regularly to remove dust and debris, which can accumulate and affect performance. Neglecting maintenance may reduce their lifespan.

---

The **Utoolmart UT190822Z-1005 16mm carbide-tipped masonry drill bit** is a strong choice for **professionals or serious DIYers** who frequently work with brick, concrete, or stone. Its **durability, precision, and efficiency** make it a worthwhile investment for heavy-duty masonry tasks. However, for **occasional users or those working primarily with soft materials**, the higher cost may not be justified, and a more budget-friendly option might suffice.

If you prioritize **longevity, performance, and versatility in hard materials**, this bit is highly recommended. Ensure your rotary hammer or hammer drill supports the **9mm SDS-plus shank** and that you use it correctly to maximize its lifespan.

- **Buy if:** You drill frequently into masonry, need a durable bit for professional or heavy DIY work, and have an SDS-plus compatible tool.

- **Avoid if:** You only drill occasionally, work mostly with wood/plastic, or need bits for very deep or extremely hard materials (consider diamond bits instead).

- **Alternative options:** For softer materials, consider steel or cobalt bits. For reinforced concrete, look for diamond-coated bits. Always check your tool s compatibility before purchasing.

Details:

Manufacturer: Utoolmart. Material Type: Chromium steel alloy. Part Number: UT190822Z-1005. Brand Name: Utoolmart.

The heavy-duty steel material used in the manufacture of these drills has a strong wear resistance that avoids any damage. Cutting Diameter: 16 Millimeters. Brand: Utoolmart. For use in drill requiring Special Direct System shank.

Model: UT190822Z-1005. Tool Flute Type: Spiral. Wide Use designed for fast drilling in concrete, masonry, artificial stone, and rock. Finish Type: Chrome.

Finish Types: Chrome. These drills can be used with many electric drills, power and other drilling machines. Unit Count: 1.0 Count. The sharp and twisted groove makes the drilling process very easy effortless.

Surface Recommendation: concrete. Flute Design Optimized flute design to reduce bit stress and make the run cooler for long life. Carbide Tip Carbide-tipped drill bit head is harder and tougher to extreme loads. Shank Type: SDS-Plus.

Provide both balance and stability to ensure fast drilling operations.You tend drill holes perfectly as these drills will keep your position intact without slipping on the material. Enteric Tip for optimal hole geometry and provides rounder holes.

part #: ut190822z1005 price

• $14.56

specifications rotarydrilli:

• brand: Utoolmart
• mpn: Ut190822z-1005
• part type: Bit Drill Hammer
• upc: 111622381119
• size: 16mm X 150mm

shipping rotarydrilli:

• type: Fixed
• cost: $0.00
• service: Expedited
• transit: 3-5 Days
• class: Expedited

offer rotarydrilli:

• sold: 0
• availability: In Stock
• quantity: 2
• options: Ship-to-home
• started: May 17, 2026

seller rotarydrilli:

• city: San Bernardino, CA
• rating: 99.6%
• # reviews: 1480

returns rotarydrilli:

• method: Money back
• policy: Returns Accepted
• paid by: Seller
• time: 60 Days

general rotarydrilli:

• Light Equipment Tools > Drills Hammers > Hammer Drills
• condition: New

payments rotarydrilli:

• other
• credit card: Mastercard
• wallet: Google-pay